Digisol DG-GS4826S Management Manual page 170

C 5 | Interface Configuration
HAPTER
VLAN Trunking
Trunk – Trunk Identifier. (Range: 1-32)
u
VLAN Trunking Status – Enables VLAN trunking on the selected
u
interface.
W I
EB NTERFACE
To enable VLAN trunking on a port or trunk:
1. Click Interface, VLAN Trunking.
2. Click Port or Trunk to specify the interface type.
3. Enable VLAN trunking on any of the Gigibit ports or on a trunk
containing Gigabit ports.
4.
Click Apply.
Figure 52: Configuring VLAN Trunking
– 170 –