Digisol DG-GS4826S Management Manual page 891

snmp-server enable
port-traps atc
multicast-control-
apply
snmp-server enable
port-traps atc
multicast-control-
release
This command sends a trap when multicast traffic exceeds the upper
threshold for automatic storm control and the apply timer expires. Use the
no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc multicast-control-apply
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-apply
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-fire-threshold (886)
auto-traffic-control apply-timer (881)
This command sends a trap when multicast traffic falls beneath the lower
threshold after a storm control response has been triggered and the
release timer expires. Use the no form to disable this trap.
S
YNTAX
[no] snmp-server enable port-traps atc
multicast-control-release
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Interface Configuration (Ethernet)
E
XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#snmp-server enable port-traps atc multicast-control-
release
Console(config-if)#
R C
ELATED OMMANDS
auto-traffic-control alarm-clear-threshold (885)
auto-traffic-control action (884)
auto-traffic-control release-timer (882)
– 891 –
C 36 | Automatic Traffic Control Commands
HAPTER