Digisol DG-GS4826S Management Manual page 454

C 16 | Multicast Filtering
HAPTER
Layer 3 IGMP (Query used with Multicast Routing)
Static Group Address – An IP multicast group address. (The group
u
addresses specified cannot be in the range of 224.0.0.1 -
239.255.255.255.)
Source Address – The source address of a multicast server
u
transmitting traffic to the specified multicast group address.
W I
EB NTERFACE
To configure static IGMP groups:
1.
Click Multicast, IGMP, Static Group.
2.
Select Add from the Action list.
3. Select a VLAN interface to be assigned as a static multicast group
member, and then specify the multicast group. If source-specific
multicasting is supported by the next hop router in the reverse path
tree for the specified multicast group, then the source address should
also be specified.
4.
Click Apply.
Figure 262: Configuring Static IGMP Groups
To display configured static IGMP groups:
1. Click Multicast, IGMP, Static Group.
2. Select Show from the Action list.
3.
Click Apply.
Figure 263: Showing Static IGMP Groups
– 454 –