C
21
| Unicast Routing
HAPTER
Configuring the Open Shortest Path First Protocol (Version 2)
W
I
EB
NTERFACE
To define an OSPF area and the interfaces that operate within this area:
1.
Click Routing Protocol, OSPF, Network Area.
2.
Select Add from the Action list.
3.
Configure a backbone area that is contiguous with all the other areas in
the network, and configure an area for all of the other OSPF interfaces.
4.
Click Apply
Figure 354: Defining OSPF Network Areas Based on Addresses
To to show the OSPF areas and the assigned interfaces:
1.
Click Routing Protocol, OSPF, Network Area.
2.
Select Show from the Action list.
Figure 355: Showing OSPF Network Areas
To to show the OSPF process identifiers:
1.
Click Routing Protocol, OSPF, Network Area.
2.
Select Show Process from the Action list.
– 562 –