Digisol DG-GS4826S Management Manual page 951

switchport private-
vlan host-
association
promiscuous – This port type can communicate with all other
promiscuous ports in the same primary VLAN, as well as with all the
ports in the associated secondary VLANs.
D S
EFAULT ETTING
Normal VLAN
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
To assign a promiscuous port to a primary VLAN, use the
private-vlan mapping command. To assign a host port to a community
VLAN, use the switchport private-vlan host-association
E
XAMPLE
Console(config)#interface ethernet 1/2
Console(config-if)#switchport mode private-vlan promiscuous
Console(config-if)#exit
Console(config)#interface ethernet 1/3
Console(config-if)#switchport mode private-vlan host
Console(config-if)#
Use this command to associate an interface with a secondary VLAN. Use
the no form to remove this association.
S
YNTAX
switchport private-vlan host-association secondary-vlan-id
no switchport private-vlan host-association
secondary-vlan-id - ID of secondary (i.e., community) VLAN.
(Range: 1-4093, no leading zeroes).
D S
EFAULT ETTING
None
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
All ports assigned to a secondary (i.e., community) VLAN can pass traffic
between group members, but must communicate with resources outside of
the group via promiscuous ports in the associated primary VLAN.
E
XAMPLE
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config-if)#
– 951 –
C 39 | VLAN Commands
HAPTER
Configuring Private VLANs
switchport
command.