Digisol DG-GS4826S Management Manual page 616

C 22 | Multicast Routing
HAPTER
Configuring PIM for IPv4
Priority – Priority value used by this BSR candidate.
u
Hash Mask Length – The number of significant bits used in the
u
multicast group comparison mask by this BSR candidate.
Expire – The time before the BSR is declared down.
u
Role – Candidate or non-candidate BSR.
u
State – Operation state of BSR includes:
9
u
No information – No information is stored for this device.
n
Accept Any – The router does not know of an active BSR, and will
n
accept the first bootstrap message it sees as giving the new BSR's
identity and the RP-set.
Accept Preferred – The router knows the identity of the current
n
BSR, and is using the RP-set provided by that BSR. Only bootstrap
messages from that BSR or from a C-BSR with higher weight than
the current BSR will be accepted.
Candidate BSR – Bidding in election process.
n
Pending-BSR – The router is a candidate to be the BSR for the RP-
n
set. Currently, no other router is the preferred BSR, but this router
is not yet the elected BSR.
Elected BSR – Elected to serve as BSR.
n
W I
EB NTERFACE
To display information about the BSR:
1.
Click Multicast, Multicast Routing, SM.
2. Select Show Information from the Step list.
3. Select Show BSR Router from the Action list.
9. These parameters are based on RFC 5059.
– 616 –