W
I
EB
NTERFACE
To map an IP subnet to a VLAN:
1.
Click VLAN, IP Subnet.
2.
Select Add from the Action list.
3.
Enter an address in the IP Address field.
4.
Enter a mask in the Subnet Mask field.
5.
Enter the identifier in the VLAN field. Note that the specified VLAN need
not already be configured.
6.
Enter a value to assign to untagged frames in the Priority field.
7.
Click Apply.
Figure 77: Configuring IP Subnet VLANs
To show the configured IP subnet VLANs:
1.
Click VLAN, IP Subnet.
2.
Select Show from the Action list.
Figure 78: Showing IP Subnet VLANs
– 201 –
C
6
| VLAN Configuration
HAPTER
Configuring IP Subnet VLANs