Digisol DG-GS4826S Management Manual page 351

Intrusion Action – Sets the port's response to a failed authentication.
u
Block Traffic – Blocks all non-EAP traffic on the port. (This is the
n
default setting.)
Guest VLAN – All traffic for the port is assigned to a guest VLAN.
n
The guest VLAN must be separately configured (See
VLAN Groups" on page
"Configuring Network Access for Ports" on page
Authenticator PAE State Machine
State – Current state (including initialize, disconnected, connecting,
u
authenticating, authenticated, aborting, held, force_authorized,
force_unauthorized).
Reauth Count – Number of times connecting state is re-entered.
u
Current Identifier – Identifier sent in each EAP Success, Failure or
u
Request packet by the Authentication Server.
Backend State Machine
State – Current state (including request, response, success, fail,
u
timeout, idle, initialize).
Request Count – Number of EAP Request packets sent to the
u
Supplicant without receiving a response.
Identifier (Server) – Identifier carried in the most recent EAP
u
Success, Failure or Request packet received from the Authentication
Server.
Reauthentication State Machine
State – Current state (including initialize, reauthenticate).
u
W I
EB NTERFACE
To configure port authenticator settings for 802.1X:
1.
Click Security, Port Authentication.
2. Select Configure Interface from the Step list.
3. Click Authenticator.
4. Modify the authentication settings for each port as required.
5. Click Apply
– 351 –
C 14
HAPTER
Configuring 802.1X Port Authentication
174) and mapped on each port (See
| Security Measures
"Configuring
298).