Digisol DG-GS4826S Management Manual page 180

C 6 | VLAN Configuration
HAPTER
IEEE 802.1Q VLANs
Figure 59: Configuring Static VLAN Members by Interface
To configure static members by interface range:
1. Click VLAN, Static.
2. Select Edit Member by Interface Range from the Step list.
3.
Set the Interface type to display as Port or Trunk.
4. Enter an interface range.
5. Modify the VLAN parameters as required. Remember that the PVID,
acceptable frame type, and ingress filtering parameters for each
interface within the specified range must be configured on either the
Edit Member by VLAN or Edit Member by Interface page.
6. Click Apply.
Figure 60: Configuring Static VLAN Members by Interface Range
– 180 –