Digisol DG-GS4826S Management Manual page 314

C 14 | Security Measures
HAPTER
Configuring the Secure Shell
P
ARAMETERS
These parameters are displayed in the web interface:
User Name – This drop-down box selects the user who's public key
u
you wish to manage. Note that you must first create users on the User
Accounts page (see
User Key Type – The type of public key to upload.
u
RSA: The switch accepts a RSA version 1 encrypted public key.
n
DSA: The switch accepts a DSA version 2 encrypted public key.
n
The SSH server uses RSA or DSA for key exchange when the client first
establishes a connection with the switch, and then negotiates with the
client to select either DES (56-bit) or 3DES (168-bit) for data
encryption.
The switch uses only RSA Version 1 for SSHv1.5 clients and DSA
Version 2 for SSHv2 clients.
TFTP Server IP Address – The IP address of the TFTP server that
u
contains the public key file you wish to import.
Source File Name – The public key file to upload.
u
W I
EB NTERFACE
To copy the SSH user's public key:
1. Click Security, SSH.
2. Select Configure User Key from the Step list.
3. Select Copy from the Action list.
4. Select the user name and the public-key type from the respective drop-
down boxes, input the TFTP server IP address and the public key source
file name.
5. Click Apply.
Figure 162: Copying the SSH User's Public Key
– 314 –
"Configuring User Accounts" on page 291).