Digisol DG-GS4826S Management Manual page 396

C 15 | Basic Administration Protocols
HAPTER
Simple Network Management Protocol
5. Click Apply
Figure 216: Adding an OID Subtree to an SNMP View
To show the OID branches configured for the SNMP views of the switch's
MIB database:
1.
Click Administration, SNMP.
2. Select Configure View from the Step list.
3. Select Show OID Subtree from the Action list.
4. Select a view name from the list of existing views.
Figure 217: Showing the OID Subtree Configured for SNMP Views
– 396 –