Vlan Specifications; Vlan Defaults - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

VLAN Specifications

VLAN Specifications
Note. The maximum limit values provided in the following Specifications table are subject to available
system resources.
Platforms Supported
RFCs Supported
IEEE Standards Supported
Maximum VLANs per switch
Maximum Tagged VLANs per Port
Maximum Untagged VLANs per Port
Maximum VLAN Port Associations (VPA)
per switch
Maximum Spanning Tree VLANs per switch 128 (1x1 mode)

VLAN Defaults

Parameter Description
VLAN identifier (VLAN ID)
VLAN administrative state
VLAN description
VLAN Spanning Tree state
VLAN IP router interface
VLAN port associations
page 4-2
OmniSwitch 10K
2674 - Definitions of Managed Objects for Bridges
with Traffic Classes, Multicast Filtering and Virtual
LAN Extensions
802.1Q - Virtual Bridged Local Area Networks
802.1D - Media Access Control Bridges
4094
4094
One untagged VLAN (default VLAN) per port.
20000
Command
vlan
vlan
vlan name
spantree vlan admin-state
ip interface
vlan members untagged
OmniSwitch AOS Release 7 Network Configuration Guide
Configuring VLANs
Default
VLAN 1 predefined on each
switch.
Enabled
VLAN ID
Enabled
None
All ports initially associated
with default VLAN 1.
March 2011