Displaying Information For Dynamic Ipv4 Source Guard Bindings - Edge-Core ECS4110-28T Management Manual

To display static bindings for IP Source Guard:
1.
2.
Figure 218: Displaying Static Bindings for IPv4 Source Guard
Use the Security > IP Source Guard > Dynamic Binding page to display the
D
ISPLAYING
source-guard binding table for a selected interface.
I
NFORMATION FOR
D IP 4
YNAMIC V
CLI R
S G
OURCE UARD
◆
B
INDINGS
P
ARAMETERS
These parameters are displayed:
Query by
◆
◆
◆
◆
Dynamic Binding List
◆
◆
◆
◆
◆
Click Security, IP Source Guard, Static Binding.
Select Show from the Action list.
EFERENCES
"show ip source-guard binding" on page 942
Port – A port on this switch.
VLAN – ID of a configured VLAN (Range: 1-4094)
MAC Address – A valid unicast MAC address.
IP Address – A valid unicast IP address, including classful types A, B
or C.
VLAN – VLAN to which this entry is bound.
MAC Address – Physical address associated with the entry.
Interface – Port to which this entry is bound.
IP Address – IP address corresponding to the client.
Lease Time – The time for which this IP address is leased to the client.
– 405 –
| Security Measures
C 13
HAPTER
IPv4 Source Guard