Edge-Core ECS4110-28T Management Manual page 444

| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
ECS ELIN – Emergency Call Service Emergency Location
■
Identification Number supports traditional PSAP-based Emergency
Call Service in North America.
Country Code – The two-letter ISO 3166 country code in capital ASCII
◆
letters. (Example: DK, DE or US)
What – The type of device to which the location applies as described
◆
for the field entry "Device entry refers to" under
LLDP Interface Attributes."
Port Details – Inventory
Hardware Revision – The hardware revision of the end-point device.
◆
Software Revision – The software revision of the end-point device.
◆
◆ Manufacture Name – The manufacturer of the end-point device.
Asset ID – The asset identifier of the end-point device. End-point
◆
devices are typically assigned asset identifiers to facilitate inventory
management and assets tracking.
Firmware Revision – The firmware revision of the end-point device.
◆
◆ Serial Number – The serial number of the end-point device.
Model Name – The model name of the end-point device.
◆
W I
EB NTERFACE
To display LLDP information for a remote port:
Click Administration, LLDP.
1.
Select Show Remote Device Information from the Step list.
2.
Select Port, Port Details, Trunk, or Trunk Details.
3.
When the next page opens, select a port on this switch and the index
4.
for a remote device attached to this port.
Click Query.
5.
Figure 239: Displaying Remote Device Information for LLDP (Port)
– 444 –
10
"Configuring