Edge-Core ECS4110-28T Management Manual page 458

| Basic Administration Protocols
C 14
HAPTER
Simple Network Management Protocol
S
ETTING
SNMP 3 V
V IEWS
Figure 248: Configuring a Remote Engine ID for SNMP
To show the remote SNMP engine IDs:
Click Administration, SNMP.
1.
Select Configure Engine from the Step list.
2.
Select Show Remote Engine from the Action list.
3.
Figure 249: Showing Remote Engine IDs for SNMP
Use the Administration > SNMP (Configure View) page to configure
SNMPv3 views which are used to restrict user access to specified portions
of the MIB tree. The predefined view "defaultview" includes access to the
entire MIB tree.
CLI R
EFERENCES
"snmp-server view" on page 806
◆
P
ARAMETERS
These parameters are displayed:
Add View
View Name – The name of the SNMP view. (Range: 1-32 characters)
◆
OID Subtree – Specifies the initial object identifier of a branch within
◆
the MIB tree. Wild cards can be used to mask a specific portion of the
OID string. Use the Add OID Subtree page to configure additional
object identifiers. (Range: 1-64 characters)
Type – Indicates if the object identifier of a branch within the MIB tree
◆
is included or excluded from the SNMP view.
– 458 –