Edge-Core ECS4110-28T Management Manual page 439

CLI R
EFERENCES
◆ "show lldp info remote-device" on page 1344
P
ARAMETERS
These parameters are displayed:
Port
Local Port – The local port to which a remote LLDP-capable device is
◆
attached.
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
Port ID – A string that contains the specific identifier for the port from
◆
which this LLDPDU was transmitted.
System Name – A string that indicates the system's administratively
◆
assigned name.
Port Details
Port – Port identifier on local switch.
◆
Remote Index – Index of remote device attached to this port.
◆
◆ Local Port – The local port to which a remote LLDP-capable device is
attached.
Chassis Type – Identifies the chassis containing the IEEE 802 LAN
◆
entity associated with the transmitting LLDP agent. There are several
ways in which a chassis may be identified and a chassis ID subtype is
used to indicate the type of component being referenced by the chassis
ID field. (See Table 27, "Chassis ID Subtype," on page
Chassis ID – An octet string indicating the specific identifier for the
◆
particular chassis in this system.
System Name – A string that indicates the system's assigned name.
◆
System Description – A textual description of the network entity.
◆
◆ Port Type – Indicates the basis for the identifier that is listed in the
Port ID field. (See Table 29, "Port ID Subtype," on page
Port Description – A string that indicates the port's description. If RFC
◆
2863 is implemented, the ifDescr object should be used for this field.
Port ID – A string that contains the specific identifier for the port from
◆
which this LLDPDU was transmitted.
System Capabilities Supported – The capabilities that define the
◆
primary function(s) of the system. (See
Capabilities," on page
– 439 –
| Basic Administration Protocols
C 14
HAPTER
Link Layer Discovery Protocol
Table 28, "System
436.)
435.)
437.)