Config Jwac Switch_Http_Port; To Configure The Jwac Switch Http Port - D-Link xStack DGS-3400 Cli Manual

xStack

config jwac switch_http_port

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To configure the JWAC switch HTTP port:

D G S –3 4 26 :5 # c on f ig j w a c s wi tc h _ ht t p_ po r t 8 8 88 h t t p
C o m ma n d: c o n fi g j wa c sw i tc h_ h t tp _ po rt 8 88 8 h tt p
S u c ce s s.
D G S –3 4 26 :5 #
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Used to configure the TCP port which the JWAC Switch listens to.
config jwac switch_http_port <tcp_port_number 1–65535> {[http | https]}
This command is used to configure the TCP port which the JWAC Switch listens to. This
port number is used in the second stage of the authentication. PC user will have to
authenticate to the switch by inputting the user name and password.
<tcp_port_number 1–65535> – A TCP port which the Switch listens to and uses for the
authenticating process.
http – To specify the JWAC runs HTTP protocol on this TCP port
https – To specify the JWAC runs HTTPS protocol on this TCP port
The HTTP cannot runs at TCP port 443, and the HTTPS cannot runs at TCP port 80.
Only Administrator and Operator-level users can issue this command.
327