Config Igmp_Snooping Querier - D-Link DGS-1100-16/ME Reference Manual

Description
Parameters
Restrictions
Example usage:
To configure the igmp snooping:
DGS-1100-24P/ME:admin#config igmp_snooping vlan_name VLAN0001
state enable
Command : config igmp_snooping vlan_name VLAN0001 state enable
Success.
DGS-1100-24P/ME:admin#

config igmp_snooping querier

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the igmp snooping:
DGS-1100-24P/ME:admin#config igmp_snooping querier vlanid 1 state
enable
Command : config igmp_snooping querier vlanid 1 state enable
Success.
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
The config igmp_snooping command configures IGMP snooping
on the Switch.
vlan_name <vlan_name 8> − The name of the VLAN for which
IGMP snooping is to be configured.
vlanid <vidlist 1-4094> − The VLAN ids for which IGMP snooping is
to be configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
fast_leave [enable | disable] − Enables or disables the fast leave.
state [enable | disable] − Enables or disables IGMP snooping for the
specified VLAN.
Only administrator-level users can issue this command.
To configure IGMP snooping querier on the Switch.
[vlan_name <vlan_name 8> | vlanid <vidlist 1-4094> | all] state
[enable | disable]
The config igmp_snooping querier command enables IGMP
snooping querier on a specific VLAN.
vlan_name <vlan_name 8> − The name of the VLAN for which
IGMP snooping is to be configured. Up to 8 characters can be used.
vlanid <vidlist 1-4094> − The VLAN id for which IGMP snooping is to
be configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
state [enable | disable] − Enables/Disables IGMP Snooping Querier.
Only administrator-level users can issue this command.
92