Config Igmp_Snooping Querier - D-Link DGS-1100-06/ME Cli Reference Manual

Restrictions
Example usage:
To configure the igmp snooping:
DGS-1100-06/ME:5#
host_timeout 250 state
enable
Command: config igmp_snooping vlan_name default host_timeout 250
state enable
Success !
DGS-1100-06/ME:5#

config igmp_snooping querier

Purpose
Syntax
Description
Parameters
DGS-1100-06/ME Metro Ethernet Managed Switch CLI Reference Guide
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
host_timeout <sec 130-153025> − Specifies the maximum amount
of time a host can be a member of a multicast group without the
Switch receiving a host membership report. The default is 260
seconds.
router_timeout <sec 60-600> − Specifies the maximum amount of
time a route can be a member of a multicast group without the
Switch receiving a host membership report.
leave_timer <sec 1-25> − Leave timer. The default is 10 seconds.
fast_leave [enable | disable] − Enables or disables the fast leave.
state [enable | disable] − Enables or disables IGMP snooping for the
specified VLAN.
Only administrator or operator-level users can issue this command.
To configure IGMP snooping querier on the Switch.
config igmp_snooping querier [vlan_name <string 20> | vlanid
<vidlist> | all] state [enable | disable] {querier_version [IGMPv2 |
IGMPv3] | last_member_query_interval <sec 1-25> |
max_response_time <sec 10-25> | query_interval <sec 60-600>}
The config igmp_snooping querier command enables IGMP
snooping querier on a specific VLAN.
vlan_name <string 20> − The name of the VLAN for which IGMP
snooping is to be configured. Up to 20 characters can be used.
vlanid <vidlist> − The VLAN id for which IGMP snooping is to be
configured.
all − Specifies all VLAN for which IGMP snooping is to be
configured.
state [enable | disable] − Enables/Disables IGMP Snooping Querier.
querier_version [IGMPv2 | IGMPv3] − Specifies the IGMP Querier
version on the VLAN.
last_member_query_interval <sec 1-25> − Specifies the last
member query interval of IGMP. The range is from 1 to 25 seconds.
max_response_time <sec 10-25> − Specifies the max response
time of IGMP. The range is from 10 to 25 seconds.
query_interval <sec 60-600> − Specifies the query interval of IGMP.
config igmp_snooping
143
vlan_name default