Advertisement
Push
Disconnect
Hook
Pin
Plunger
Push
17.
ADJUST VALVE CLEARANCE (See page 14–5)
2004 COROLLA (RM1037U)
ENGINE MECHANICAL
NOTICE:
When installing the tensioner, set the hook again if the
hook release the plunger.
A62178
Turn
A62180
HINT:
If the plunger does not spring out, press the slipper into the
chain tensioner with a screwdriver so that the hook is released
from the knock pin and the plunger springs out.
Turn
A62181
18.
(a)
A11858
–
CAMSHAFT
(2)
Apply engine oil to the chain tensioner and install it
with the 2 nuts.
Torque: 9.0 N⋅m (92 kgf⋅cm, 80 in⋅lbf)
(3)
Turn the crankshaft counter clockwise, and discon-
nect the plunger knock pin from the hook.
(4)
Turn the crankshaft clockwise, and check that the
slipper is pushed by the plunger.
INSTALL V–RIBBED BELT TENSIONER ASSY
Install the V–ribbed belt tensioner with the nut and bolt.
Torque:
Nut 29 N⋅m (296 kgf⋅cm, 21 ft⋅lbf)
Bolt 69 N⋅m (704 kgf⋅cm, 51 ft⋅lbf)
14–105
Advertisement
