Configuring The System For Syslog Reporting; Enabling And Disabling Syslog Messages; Specifying The Device To Which The Secure Router 2330/4134 Sends Syslog Messages - Avaya 2330/4134 Troubleshooting Manual

Secure Router 2330/4134 system error messages
Level
Warning
Notification
Informational
Debugging

Configuring the system for syslog reporting

Use the commands in this section to enable and disable syslog reporting and to define
parameters for syslog messages.

Enabling and disabling syslog messages

Use the commands in this section to enable and disable syslog messages.
Procedure steps
1. To access configuration mode, enter:
2. To enable or disable syslog messages, enter:
Specifying the device to which the Secure Router 2330/4134 sends
syslog messages
Use the commands in this section to specify the host IP address to which the Secure Router
2330/4134 sends syslog messages
Procedure steps
1. To access configuration mode, enter:
2. To specify the host IP address (IPv4 address) to which the Secure Router
376 Troubleshooting
Warning condition
Normal but significant condition
Informational only
Message that appears only during debugging
configure terminal
system logging syslog {enable|disable}
configure terminal
2330/4134 sends syslog messages, enter:
Comments? infodev@avaya.com
Description
August 2013