Mediation Server module configuration for SR4134
•
Assigning a static IP address to the Mediation Server module using Windows
page 29
•
Assigning a static IP address to the Mediation Server module using a console
connection
•
Configuring a description for the midplane interface
•
Displaying the midplane interface configuration
•
Configuring the Mediation Server
Specifying an IP address for the midplane interface
Use this procedure to specify an IP address for one of the midplane Ethernet interfaces that
connects to the Mediation Server module.
By default, no IP address is assigned to the interface.
Procedure steps
1. To enter configuration mode, enter:
2. To select midplane interface configuration, enter:
3. To specify an IP address for the midplane interface, enter:
4. To enable the interface, enter:
Enabling DHCP on the midplane interface
Use this procedure to enable DHCP on the midplane Ethernet interface.
To enable the Mediation Server module functionality, you must configure an IP address on one
of the Mediation Server interfaces. If you are configuring the Mediation Server remotely, you
can enable the DHCP server on one of the connected SR4134 midplane Ethernet interfaces
to assign an IP address to the Mediation Server module.
Procedure steps
1. To enter configuration mode, enter:
26
Avaya AG2330/SR2330/SR4134 Quick Start Guide
on page 27
configure terminal
interface servmod <slot/port>
ip address <ip-address> <subnet-mask>
no shutdown
Comments? infodev@avaya.com
on page 29
on page 30
on page 30
on
August 2013