Displaying Switch Power Supply Information Using Edm - Avaya 3500 series Configuration Manual

Network monitoring configuration using Enterprise Device Manager
Name
Last10minutes
Last1hour
Last24Hours
TotalCPUUsage
MemoryTotalMB
MemoryAvailableMB
MemoryUsedMB

Displaying switch power supply information using EDM

Use this procedure to display power supply status for the switch.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, click Chassis.
3. In the Chassis tree, click Environment.
4. In the work area, click the PowerSupply tab.
5. On the toolbar, click Refresh to update the data.
PowerSupply tab field descriptions
The following table describes the fields on the PowerSupply tab.
Name
Unit
Power Supply
42 Configuration — System Monitoring
Description
Displays CPU usage, in percentage, for the
last 10 minutes
Displays CPU usage, in percentage, for the
last hour
Displays CPU usage, in percentage, for the
last 24 hours
Displays the CPU load in percentage since
the boot
Displays total memory present, in
megabytes, on the unit
Displays memory remaining available on the
unit
Displays memory that has been used on the
unit
Description
Displays the switch.
Displays the power status for the switch.
Comments? infodev@avaya.com
March 2013