Viewing And Editing Ipv6 Rsmlt Local Information - Avaya ERS 8800 series Configuration Manual

Procedure steps
1. In the navigation tree, open the following folders: Configuration, IP.
2. Double-click RSMLT.
3. In the Globals tab, select the EdgeSupportEnable option box.
4. Click Apply.

Viewing and editing IPv6 RSMLT local information

Use the following procedure to view and edit RSMLT local VLAN switch information.
Any configurations you make using this tab are not specific to IPv6. The configurations applied
under the IPv6 RSMLT tab also apply to IPv4 RSMLT.
Procedure steps
1. In the navigation tree, open the following folders: Configuration, IPv6.
2. Double-click RSMLT.
3. In the Local tab, edit fields as required.
4. Click Apply.
Variable definitions
Use the data in the following table to view and edit IPv6 RSMLT local information.
Variable
IfIndex
Ipv6Addr
Ipv6PrefixLengt
h
Enable
HoldDownTimer Defines how long the recovering/rebooting switch remains in a non-
Configuration — IPv6 Routing
The IP route SMLT operation index.
The IP address of the VLAN when RSMLT is enabled.
The IPv6 prefix length.
Specifies the status of RSMLT
Layer 3 forwarding mode for the peer router MAC address.
The range of this value is from 0 to 3600 seconds.
Viewing and editing IPv6 RSMLT local information
Value
November 2010 253