SSANGYONG 1999 Musso Service Manual page 1167

5C-14 CLUTCH
Removal & Installation Procedure
1. Draw out the fluid.
2. Pull out the snap pin and clevis pin from the clutch pedal
connection.
3. Remove the clutch tube.
Installation Notice
Tightening Torque
Notice
Be careful not the fluid contact a painted surface.
4. Remove the master cylinder mounting nuts and pull off the
master cylinder.
Installation Notice
Tightening Torque
5. Check the clutch pedal operation.
6. Bleed the clutch system.
15 - 18 Nm
8 - 18 Nm