SSANGYONG 1999 Musso Service Manual page 1196

5D1-26 TRANSFER CASE (PART TIME 4408)
3. Slide the torsion spring and spacer to the left of the shift
shaft and position the end of the first spring to fix on the
drive tang.
4. Push the end of the second spring to right and fix it on the
drive tang.
5. Push the torsion spring and spacer together back them
completely.
6. Slide the electric shift cam onto the shift shaft.
7. Install the electric shift cam assembly into the transfer case
after installation of the shift fork.
101 Torsion Spring
102 Spacer
103 Shift Shaft
101 Torsion Spring
102 Spacer
103 Shift Shaft
101 Torsion spring
102 Spacer
103 Shift Shaft