SSANGYONG 1999 Musso Service Manual page 1189

<Reduction Shift Parts>
1. Remove the reduction hub and reduction shift fork assembly
from the case.
2. Remove the 2 shill fork facings from the shift fork assembly.
3. To remove the roller cam and pin, cut elf the plastic retainer
when disassembling the fork assembly.
<Front Output Assembly>
1. Holding the companion flange, remove the nut and washer
and then remove the companion flange and oil seal.
2. Remove the output shaft.
57 Reduction Hub
58 Shift Fork Facing
59 Reduction Shift Fork Assembly
60 Roller Pin and Retainer Assembly
61 Retainer
62 Pin
63 Roller Cam
64 Reduction Shift Fork
65 Nut
66 Washer
67 Oil Seal
70 Companion Flange
71 Output Shaft (front)
111 Case
TRANSFER CASE (PART TIME 4408) 5D1-19