SSANGYONG 1999 Musso Service Manual page 1165

5C-12 CLUTCH
Inspection Procedure
1. Clutch Cover
Check the diaphragm spring tip for wear and height
unevenness.
Unevenness Limit
Check the pressure plate surface for wear, crack and
discoloration.
Check the strap plate rivet for looseness and replace
the clutch cover if loosened.
2. Clutch Disc
Check the facing for rivet looseness, excessive runout,
sticks, oil and grease.
Measure the rivet head depth.
If out limit, replace the disc.
Wear Limit
3. Clutch Release Bearing
The release bearing is permanently lubricated and
requires no cleaning.
Check the bearing for sticks, damage, abnormal noise,
turning drag and wear.
4. Release Fork
If there is abnormal wear in contact point with bearing,
replace the release fork.
0.8 mm
0.3 mm