4Yy.xx Paper Jams - Lexmark X950 Quick Reference

b
If the paper is not visible, then you will need to remove the fuser
unit.
Warning—Potential Damage: Do not touch the center of
the fuser unit. Doing so will damage the fuser.
1 Remove the thumbscrew from each side of the fuser unit
by rotating them counterclockwise.
2
Lift the handles on each side of the fuser, and then pull to
remove the fuser unit.
1
2
3 Firmly grasp the jammed paper on each side, and then
gently pull it down and out.
2
Notes:
• Make sure all paper fragments are removed.
• If the paper is in the fuser, then lower the fuser nip
release lever and switch it to envelope mode.
•
4 Align the fuser unit using the handles on each side, and then
place it back into the printer.
3
Close door A.
4
If necessary, touch Continue from the printer control panel.
Paper jam in cover F (paper transport)
1
Open cover F.
1
1
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
After removing the jammed paper, return the lever to
the proper position.
2
2
1
21
Note: If the paper jam on the right is difficult to remove, then
rotate the knob counterclockwise.
3 Close cover F.
4 If necessary, touch Continue from the printer control panel.

4yy.xx paper jams

If the jammed paper is visible in any of the finisher exit bins, then firmly
grasp the paper on each side, and then gently pull it out.
1 Standard finisher bin
2 Finisher bin 1
3 Finisher bin 2
Note: Finisher bin 2 is available only when a booklet finisher is
installed.