If Unanswered; Transfer A Call; To Transfer A Call (With Announcement); Initiate Transfer (By Ex.200) - NEC DT930 Series User Manual

1.

If Unanswered

After a predetermined time, Automatic Recall
is initiated and the user hears the Automatic
Recall ringer tone. Default time is one minute.
The starting time to ring the Automatic Recall is
set using system data during initial installation.
For details, contact the system administrator.

Transfer a Call

To Transfer a Call (With Announcement)

This feature allows a terminal user to transfer incoming
or outgoing calls to another terminal within the system.

Initiate Transfer (By Ex.200)

(1) With a call in progress:
The Line key lamp lights green.
(2) Press the Transfer key.
You will receive a special dial tone.
The Calling party is placed on hold.
(3) Dial the destination extension number.
You will receive a dial tone.
The dialed extension number is displayed with
flash.
(4) The destination answers the transferred call.
❍
After the call is answered, announce the call is
transferred.
(5) Replace the handset.
Line key lamp goes off.
A call is transferred.

Answer to a Transferred Call (By Ex.210)

(1) A ringing is heard.
The Call Indicator lamp flashes.
The Line key lamp flashes red.
The extension number that initiates call transfer is
displayed on the LCD.
(2) Lift the handset to start a conversation with the
extension (200).
The Call Indicator lamp goes off.
The Line key lamp lights green.
(3) Start conversation with transferred party.
❍
Extension (200) replaces the handset.

To Transfer a Call (Without Announcement)

After dialing the transfer destination number, the
handset can be replaced before the destination party
answers. When the transfer destination party lifts the
handset, it is automatically connected with the
transferred party. The phone number of the transferred
party is displayed on the destination terminal.
Initiate Transfer (By Ex.200)
(1) With a call in progress.
The Line key lamp lights green.
(2) Press the Transfer key.
You will receive a special dial tone.
Calling party is placed on hold.
(3) Dial the destination extension number.
You will receive a dial tone.
The dialed extension number is displayed with
flash.
111