0514 - Service Code Setup (Part B) - NEC 28i System Manual

0514 - Service Code Setup (Part B)

Description
Use Program 0514 - Service Code Setup (Part B) to customize
Service Codes. (You can customize additional Service Codes in
Program 0511.) Refer to the following chart for Hotel/Motel Service
Codes. For each Service Code, the chart shows:
The number of each code (Items 1-100)
The code's default assignment.
The feature reference for the code.
The function of the service code.
If you change a service code, be sure to make a record of your new entry.
Service Code Setup (Part B) - Program 0514
Item Default
56 -
Conditions
None
Default Setting
Refer to the chart above.
Feature Cross Reference
PMS Integration (Toll Restriction Conversion)
Telephone Programming Instructions
To enter data for Program 0514 (Service Code Setup, Part B):
1. Enter the programming mode.
2. 0514 + HOLD.
Tenant No?
3. Enter the number of the Tenant Group you want to program (1-4)
+ HOLD
SRVCD?
4. Enter the number of the Service Code you want to program (001-
100) + HOLD
SRVCD nnn
The previously programmed value displays.
5. Enter the Service Code data + HOLD
SRVCD
6. Repeat from step 4 to program another Service Code.
OR
HOLD + Repeat from step 3 to select another Tenant Group.
OR
HOLD + HOLD to exit.
3-18
New
Feature
166 PMS Integration
(Toll Restriction
Conversion)
Function
Changing a room tele-
phone's PMS Restriction
Level