History Size - Cisco 300 Series Cli Manual

User Interface Commands
OL-32830-01 Command Line Interface Reference Guide
Syntax
history
no history
Parameters
This command has no arguments or keywords
Default Configuration
Enabled.
Command Mode
Line Configuration Mode
User Guidelines
This command enables saving user-entered commands for a specified line. You
can return to previous lines by using the up or down arrows.
It is effective from the next time that the user logs in via console/telnet/ssh.
The following are related commands:
•
Use the terminal history size
disable this command for the current terminal session.
•
Use the

history size

the command history buffer.
Example
The following example enables the command for Telnet
switchxxxxxx(config)# line telnet
switchxxxxxx(config-line)# history
55.12 history size
To change the maximum number of user commands that are saved in the history
buffer for a particular line, use the history size Line Configuration Mode command.
User EXEC mode command to enable or
Line Configuration Mode command to set the size of
55
.
1042