End - Cisco 300 Series Cli Manual

User Interface Commands
OL-32830-01 Command Line Interface Reference Guide
Syntax
privilege-level
enable [
Parameters
privilege-level—(Optional) Specifies the privilege level at which to enter the
system.(Range: 1,7,15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
Example
The following example enters privilege level 7.
switchxxxxxx# enable 7
enter password:**********
switchxxxxxx#
Accepted
The following example enters privilege level 15.
switchxxxxxx# enable
enter password:**********
switchxxxxxx#
Accepted

55.7 end

To end the current configuration session and return to the Privileged EXEC mode,
use the end command.
Syntax
end
]
55
1038