Voice Vlan Dscp - Cisco 300 Series Cli Manual

57
Voice VLAN Commands
Default Configuration
5
Command Mode
Global Configuration mode
Example
The following example sets 7 as the voice VLAN VPT. A notification that the new
settings are different than the old ones is displayed.
7
switchxxxxxx(config)# voice vlan vpt
For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCPwill
cause the switch to advertise the administrative voice VLAN as static voice
VLANwhich has higher priority than voice VLAN learnt from external sources.
Are you sure you want to continue? (Y/N)[Y] Y
30-Apr-2011 00:24:52 %VLAN-W-BestLocal!=Oper: inconsistency detected, VSDP voice
VLAN configuration differs from best local. Best local is Voice VLAN-ID 104, VPT
5, DSCP 46
switchxxxxxx(config)# 30-Apr-2011 00:25:07 %VLAN-I-ReceivedFromVSDP: Voice VLAN
updated by VSDP. Voice VLAN-ID 104, VPT 7, DSCP 46
57.7

voice vlan dscp

To specify a value of DSCP that will be advertised by LLDP in the Network Policy
TLV, use the voice vlan dscp Global Configuration mode command. To return the
value to the default, use the no format of the command.
Syntax
voice vlan dscp dscp-value
no voice vlan dscp
Parameters
dscp-value
dscp —The DSCP value (range 0-63).
1103 OL-32830-01 Command Line Interface Reference Guide