Show Vlan Macs-Groups - Cisco 300 Series Cli Manual

56
1073
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#
switchxxxxxx(config-if)#

56.23 show vlan macs-groups

Use the show vlan macs-groups EXEC mode command to display the MAC
addresses that belong to the defined MAC-based classification rules.
Syntax
show vlan macs-groups
Parameters
N/A
Default Configuration
N/A
Command Mode
User EXEC mode
Example
The following example displays defined MAC-based classification rules.
switchxxxxxx#
show vlan macs-groups
MAC Address
--------------------- --------------------- ---------------------
00:12:34:56:78:90
00:60:70:4c:73:ff
Virtual Local Area Network (VLAN) Commands
switchport mode general
switchport general map macs-group 1 vlan 2
switchport general map macs-group 2 vlan 3
Mask
20
40
OL-32830-01 Command Line Interface Reference Guide
Group ID
22
1