Cisco 300 Series Cli Manual page 1099

57
1099
switchxxxxxx(config)# voice vlan state disabled
switchxxxxxx(config)#
<CR>
Example 2 — The following example enables the OUI mode of Voice VLAN. The
first try did not work - it was necessary to first disable voice VLAN.
switchxxxxxx(config)# voice vlan state oui-enabled
Disable the voice VLAN before changing the voice VLAN trigger.
switchxxxxxx(config)# voice vlan state disabled
switchxxxxxx(config)#
<CR>
Example 3 — The following example disables the Voice VLAN state. All auto
Smartport configuration on ports are removed.
switchxxxxxx(config)# voice vlan state disabled
All interfaces with Auto Smartport dynamic type will be set to default.
Are you sure you want to continue? (Y/N)[Y] Y
switchxxxxxx(config)# 30-Apr-2011 00:04:41 %LINK-W-Down:
30-Apr-2011 00:04:41 %LINK-W-Down:
30-Apr-2011 00:04:41 %LINK-W-Down:
30-Apr-2011 00:04:41 %LINK-W-Down:
Example 4 —The following example sets the Voice VLAN state to auto-triggered.
The VLANs are re-activated after auto SmartPort state is applied.
switchxxxxxx(config)# voice vlan state auto-triggered
switchxxxxxx(config)# 30-Apr-2011 00:13:52 %LINK-I-Up:
30-Apr-2011 00:13:52 %LINK-I-Up:
30-Apr-2011 00:13:52 %LINK-I-Up:
30-Apr-2011 00:13:52 %LINK-I-Up:
v
oice vlan state oui-enabled
v oice vlan state oui-enabled
Vlan 8
Vlan 9
Vlan 100
Vlan 8
Vlan 9
Vlan 100
OL-32830-01 Command Line Interface Reference Guide
Voice VLAN Commands
Vlan 5
Vlan 5