Virtual Local Area Network (VLAN)
Commands
OL-32830-01 Command Line Interface Reference Guide
56.0
56.1
vlan database
Use the vlan database Global Configuration mode command to enter the VLAN
Configuration mode. This mode is used to create VLAN(s) and define the default
VLAN.
Use the exit command to return to Global Configuration mode.
Syntax
vlan database
Parameters
N/A
Default Configuration
VLAN 1 exists by default.
Command Mode
Global Configuration mode
Example
The following example enters the VLAN Configuration mode, creates VLAN 1972
and exits VLAN Configuration mode.
switchxxxxxx(config)#
switchxxxxxx(config-vlan)#
switchxxxxxx(config-vlan)#
vlan database
1972
vlan
exit
56
1052