Virtual Local Area Network (VLAN) Commands
OL-32830-01 Command Line Interface Reference Guide
•
detailed—Displays information for non-present ports in addition to present
ports.
Default Configuration
Show all protected interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
User EXEC mode
Example
switchxxxxxx#
show interfaces protected-ports
Interface
State
---------
-------------
gi11
Protected
gi12
Protected
gi13
Unprotected
gi14
Unprotected
56.11 switchport community
Use the switchport community Interface Configuration mode command to
associate a protected port with a community. Use the no form of this command to
return to the default.
Syntax
switchport community
no switchport community
Parameters
•
community
—Specifies the community number. (range: 1 - 31).
Default Configuration
The port is not associated with a community.
Community
---------
1
Isolated
20
Isolated
community
56
1060