Destination - Cisco Nexus 7000 Series Command Reference Manual

D Commands

destination

To configure the destination for the tunnel-te interface, use the destination command. To restore the
system to its default condition, use the no form of this command.
Syntax Description
ip-address
Defaults None
Command Modes TE interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure the destination for the tunnel:
switch# configure terminal
switch(config)# interface tunnel-te 1
switch(config-if-te)# destination 10.1.1.4
switch(config-if-te)#
Related Commands Command
interface tunnel-te
OL-24994-01
destination ip-address
no destination
IP address is in dotted decimal notation.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
destination
131