Show Bgp Neighbor - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

show bgp neighbor

show bgp neighbor <ip address> {[accepted-routes | flap-statistics |
received-routes | rejected-routes | suppressed-routes | transmitted-routes]
{detail} [community [access-profile <access profile> | no-advertise |
no-export | no-export-subconfed | number <community number> |
<autonomous system id>:<bgp community>] | as-path [<as-path-expression> |
access-profile <access profile>] | route-map <route map> | network <ip
address>/<mask> {exact} | all]}
Description
Displays information about a specified neighbor.
Syntax Description
ip address
accepted-routes
flap-statistics
received-routes
rejected-routes
suppressed-routes
transmitted-routes
detail
access profile
no-advertise
no-export
no-export-subconfed
community number
autonomous system id
access profile
route map
ip address
mask
exact
all
Default
N/A.
Usage Guidelines
Use this command to display information about a specific BGP neighbor. If you do not specify a
neighbor, information about all neighbors is displayed.
1474
Specifies an IP address that identifies a BGP neighbor.
Specifies that only accepted routes should be displayed.
Specifies that only flap-statistics should be displayed (for route flap dampening
enabled routes).
Specifies that only received routes should be displayed.
Specifies that only rejected routes should be displayed.
Specifies that only suppressed routes should be displayed (for route flap
dampening enabled routes).
Specifies that only transmitted routes should be displayed.
Specifies to display the information in detailed format.
Specifies an access profile used as a community attribute.
Specifies the no-advertise community attribute.
Specifies the no-export community attribute.
Specifies the no-export-subconfed community attribute.
Specifies a community number.
Specifies an autonomous system ID (0-65535).
Specifies an access profile.
Specifies a route map.
Specifies an IP address.
Specifies a subnet mask (number of bits).
Specifies an exact match with the IP address and subnet mask.
Specifies all routes.
ExtremeWare Software 7.3.0 Command Reference Guide