Adding Additional Interfaces; Figure 159: Example Wrapper.conf File - Extreme Networks Sentriant AG Software User's Manual
Hide thumbs
Also See for Sentriant AG:
- Installation manual (80 pages) ,
- User manual (422 pages) ,
- Software user's manual (526 pages)
Table of Contents
Advertisement
Adding Additional Interfaces
For this release, if you want to add additional interfaces, you must install them manually. A future
release will expand the options in the installer to include multiple interfaces.
To add additional interfaces to the DAC host:
Windows server
1 Open the
DAC/conf/wrapper.conf
a Locate the Application Parameters section in the
like the following:
wrapper.app.parameter.X
Where
is the numerical value representing the order in which the parameter will be added to
X
the command.
b Change any parameters necessary for your specific setup. The interface and IP address
parameters are the only parameters that require a change; however, changing other parameters
can assist you for debugging purposes.
Figure 159: Example wrapper.conf File
# Application parameters.
wrapper.app.parameter.1=RemoteDac
wrapper.app.parameter.2=-d
wrapper.app.parameter.3=-l
wrapper.app.parameter.4=../log/DAC.log
wrapper.app.parameter.5=-k
wrapper.app.parameter.6=../lib/DAC_keystore
wrapper.app.parameter.7=-h
#replace wrapper.app.parameter.8 with the Enforcement Server IP address.
#for multiple Enforcement Servers add more parameters and increment the ones below
#example:
#wrapper.app.parameter.8=<ip 1>
#wrapper.app.parameter.9=<ip 2>
#wrapper.app.parameter.10=<ip 2>
#wrapper.app.parameter.11=-i
#wrapper.app.parameter.12="\Device\NPF_{9F658297-43BF-4EA0-A1E3-3FA2FFD55C70}"
#wrapper.app.parameter.13=-f
#etc...
wrapper.app.parameter.8=172.17.100.100
wrapper.app.parameter.9=-i
#replace wrapper.app.parameter.10 with your interface
#to find your interfaces please run the following from the lib directory
#java -jar SA_DeviceActivityCapturer.jar -L
#this will list all available interfaces replace the following parameter with your
interface
wrapper.app.parameter.10="\Device\NPF_{54052575-E4CC-46A5-B626-9167DD4F9BE3}"
wrapper.app.parameter.11=-f
wrapper.app.parameter.12="udp src port 67"
Sentriant AG Software Users Guide, Version 5.3
file with a text editor.
wrapper.conf
Add parameters as needed starting from 1
Remote Device Activity Capture
file. You will see a list of entries
279
Advertisement
Table of Contents
