Show Ospf Area - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

show ospf area

show ospf area <area identifier>
Description
Displays information about a particular OSPF area.
Syntax Description
area identifier Specifies an OSPF area.
Default
N/A.
Usage Guidelines
None.
Example
The following command displays information about OSPF area 1.2.3.4:
show ospf area 1.2.3.4
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
1378 ExtremeWare Software 7.3.0 Command Reference Guide