Create Isis Area - Extreme Networks ExtremeWare Command Reference Manual

create isis area

create isis area
create isis area <name>
Description
Creates an IS-IS level 1 area.
Syntax Description
name Specifies the area identifier.
Default
N/A.
Usage Guidelines
Currently, only one level 1 area can be created.
The maximum length for an area identifier is 32 characters. The identifier must begin with one
alphabetic character followed by up to 31 alphabetic or numeric characters.
Example
The following command creates an IS-IS level 1 area:
create isis area a1000
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide 1327