Show Ospf Virtual-Link - Extreme Networks ExtremeWare Command Reference Manual

show ospf virtual-link

show ospf virtual-link {routerid <routerid> <area identifier>}
Description
Displays virtual link information about a particular router or all routers.
Syntax Description
routerid
area identifier
Default
N/A.
Usage Guidelines
area identifier—Transit area used for connecting the two end-points. The transit area cannot have the IP
address 0.0.0.0.
Example
The following command displays virtual link information about a particular router:
show ospf virtual-link routerid 1.2.3.4 10.1.6.1
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a router interface number.
Specifies an OSPF area.
show ospf virtual-link
1385