Configure Ospf Vlan Neighbor Delete - Extreme Networks ExtremeWare Command Reference Manual

configure ospf vlan neighbor delete

configure ospf vlan <vlan name> neighbor delete <ipaddress>
Description
Deletes the IP address of a point-to-point neighbor.
Syntax Description
vlan name
ipaddress
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor delete 10.0.0.1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a VLAN name.
Specifies an IP address.
configure ospf vlan neighbor delete
1831