Configure Ospf Vlan Neighbor Add - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf vlan neighbor add

configure ospf vlan <vlan name> neighbor add <ipaddress>
Description
Configures the IP address of a point-to-point neighbor.
Syntax Description
vlan name
ipaddress
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the IP address of a point-to-point neighbor:
configure ospf vlan accounting neighbor add 10.0.0.1
History
This command was first available in ExtremeWare 6.2.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
1830
Specifies a VLAN name.
Specifies an IP address.
ExtremeWare 7.7 Command Reference Guide