Table of Contents
Advertisement
Restoring a Database from a Windows Server to
the Engine
This section describes several Extreme Management Center configuration
changes that are required if you are moving your Extreme Management Center
installation from a Windows platform system to the engine. The steps are
performed after restoring your database to the new engine. (For information on
restoring a database, see the Server Information section in the Extreme
Management Center Suite-Wide Tools User Guide.)
Changing Console
Use the following instructions to change the location of syslog and trap
information to the new location on the engine.
Changing Syslog Location
Change the Syslog Log Manager to point to the new location on the engine. This
allows the display of syslog information in the Syslog Event View tab.
1. From the Console menu bar, select Tools > Alarm/Event > Event View Manager.
2. Click on the Syslog entry under Available Log Managers, and click the Edit button.
The Log Manager Parameters window opens.
3. Change the path in the Log Directory field to /var/log/messages.
4. Change the Pattern to Red Hat LINUX Syslog Pattern.
5. Click OK.
Changing Traps Location
Change the Traps Log Manager to point to the new location on the engine. This
allows the display of trap information in the Traps Event View tab.
1. From the Console menu bar, select Tools > Alarm/Event > Event View Manager.
2. Click on the Traps entry under Available Log Managers, and click the Edit button.
The Log Manager Parameters window opens.
3. Change the path in the Log Directory field to %logdir%/traps.
4. Click OK.
Restoring a Database from a Windows Server to the Engine
24 of 34
Advertisement
Table of Contents
