Config Snmp System_Location; Config Snmp System_Name - Extreme Networks EAS 100-24t Switch CLI Manual

config snmp system_contact
Description
Parameters
Restrictions
Example usage:
To configure the switch contact to "MIS Department II":
#config snmp system_contact MIS Department II
Command: config snmp system_contact MIS Department II
Success.
#

config snmp system_location

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the switch location for "HQ 5F":
#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
#

config snmp system_name

Purpose
Syntax
Description
Parameters
Extreme Networks EAS 100-24t Switch CLI Manual
This command is used to enter the name and/or other information to identify a
contact person who is responsible for the switch. A maximum of 128
characters can be used.
<sw_contact> - A maximum of 128 characters is allowed. A NULL string is
accepted if there is no contact.
Only Administrator-level users can issue this command.
Used to enter a description of the location of the switch.
config snmp system_location {<sw_location>}
This command is used to enter a description of the location of the switch. A
maximum of 128 characters can be used.
<sw_location> - A maximum of 128 characters is allowed. A NULL string is
accepted if there is no location desired.
Only Administrator-level users can issue this command.
Used to configure the name for the switch.
config snmp system_name {<sw_name>}
This command is used to configure the name of the switch.
<sw_name> - A maximum of 128 characters is allowed. A NULL string is
accepted if no name is desired.
Network Management (SNMP) Commands
87