Deleting And Resetting Ip Multicast Settings; Ip Multicast Routing Reset And Disable Commands - Extreme Networks Summit Summit24 Installation And User Manual

IP Multicast Routing
Table 63: IP Multicast Routing Show Commands (continued)
Command
show ipmc cache {detail} {<group>} {<source>
<netmask>}}

Deleting and Resetting IP Multicast Settings

To return IP multicast routing settings to their defaults and disable IP multicast routing functions, use
the commands listed in Table 64.
Table 64: IP Multicast Routing Reset and Disable Commands
Command
clear igmp snooping {vlan <name>}
clear ipmc cache {<group> {<source>
<netmask>}}
disable igmp {vlan <name>}
disable igmp snooping
disable ipmcforwarding {vlan <name>}
unconfig igmp
208
Description
Displays the IP multicast forwarding cache.
Description
Removes one or all IGMP snooping entries.
Resets the IP multicast cache table. If no options
are specified, all IP multicast cache entries are
flushed.
Disables the router-side IGMP processing on a
router interface. No IGMP query is generated, but
the switch continues to respond to IGMP queries
received from other devices. If no VLAN is
specified, IGMP is disabled on all router
interfaces.
Disables IGMP snooping. IGMP snooping can be
disabled only if IP multicast routing is not being
used. Disabling IGMP snooping allows all IGMP
and IP multicast traffic to flood within a given
VLAN.
Disables IP multicast forwarding.
Resets all IGMP settings to their default values
and clears the IGMP group table.
Summit24e3 Switch Installation and User Guide