Table of Contents
Advertisement
dummyhead
dummyhead
LIGHTS/METERS/SWITCHES
BRAKE LIGHT SWITCH
FRONT
Disconnect the front brake light switch connectors and
check for continuity between the terminals.
There should be continuity with the brake lever applied,
and there should be no continuity with the brake lever
released.
REAR
Remove the shroud/side cover (NC700X/XA/XD) (page
2-14).
Remove the shelter/side cover (NC700S/SA/SD) (page
2-15).
Disconnect the rear brake light switch 3P (Black)
connector [1] and check for continuity between the
terminals.
There should be continuity with the brake pedal applied,
and there should be no continuity with the brake pedal
released.
CLUTCH SWITCH (NC700X/XA/S/SA)
Disconnect the clutch switch connectors and check for
continuity between the terminals.
There should be continuity with the clutch lever applied,
and there should be no continuity with the clutch lever
released.
22-26
[1]
Hide quick links:
Advertisement
Table of Contents
